Intermediate goods between 7 and 10 tons;As long as the customer's residence is not very remote, logistics vehicles can be directly delivered to the door;If the place is remote or not suitable for large vehicles, it also needs to be transferred. Either the customer drives the logistics to pick up the goods, or the logistics contact car is transferred to the customer factory, but the freight of the logistics contact car may be higher.
If the customer is not in urgent need of goods, it is best to wait a few days and then report to the two logistics distribution stations.The purpose of finding two distribution points is to prevent one distribution point from monopolizing virtual high freight rates, but not to report to multiple distribution points at will.In this way, the delivery station will think that you are in a hurry to deliver goods, and always control the vehicle and drive up the freight, resulting in unnecessary waste.
Pallet packaging and shipping points;Pallet packaging from the beginning to pay attention to the pallet is solid wood, do not rot materials or scraps, especially the bottom corner;Tray paper and winding film should not be too thin, the winding film should be wound up and down at least 4 * 6 times;When bottling, it is best to use tray positioning frame to prevent packaging deformation;When the product is small bottle, the tonnage is heavy, the pressure is large, the total height should be reduced, the actual weight should be controlled at about 1 ton, not more than 1.2 tons;When loading the bracket to the logistics vehicle, the bracket and the bracket should be very close, the front can not be said, if loaded from the middle, the first row should be tied with rope, the two sides of the inverted pull 3 ~ 4 knife, all the trays are transverse each pallet tightening 2 rope, the purpose is to "use the rope to ensure that the pallet and the body as a whole"!If the driver slacks off on the route map and drags along a few lines, the consequences can be serious!